Zacklifts expertly engineered high tensile cast steel fork receivers are adjustable to any width and the following settings: High setting is achieved by positioning fork  receivers with tallest socket set atop the exclusive diamond shaped cross bar. Fork receivers facing in towards the wrecker makes for the closest possible positioning of the load. Forks may be positioned beyond the cross bar for the longest reach possible. This setting is also the low position for slipping under bumpers.

 

 

5 sets high strength cast steel forks: chain forks for tow bar like hook up, 1 x 2.5,  Torsion Bar,  6 x 6.5,  and 9 x 4 forks.

Universal Fork Receivers, shown with 9 x 4 fork

 

12” Reach Extenders increase the reach with any fork and move a large rear differential away from the underlift’s crossbar.

All Zacklift underlifts are fully hydraulic and include a trouble-free electric over hydraulic sectional valve (manual or electric sections can be added) with roto-molded weather cover or self contained 12/24 volt power system. Both include 15’ corded remote. Wireless is optional.

 

“Million-Mile” Timken roller bearings, in the critical pivot hub, outlives any bushing found in other underlifts.

Both Stationary and Fifthwheeler mounting hardware is included when purchasing a Zacklift!