The sectional valve is for use when hooking up to an existing PTO/ pump or when choosing to add a PTO/ pump. All hydraulic hoses and fittings are supplied from the Zacklift to the Zacklift valve. A custom roto-molded cover is supplied with the valve, for weather protection and clean lines. Quick Disconnects are utilized on the
FIFTHWHEELER. Simply clamp and disconnect before the
FIFTHWHEELER drive-off procedure. If the toolbox option is utilized, all hoses and fittings are factory mounted inside the box.

If self contained power is required, a 12(or24) Volt Power Package can become a NO-CHARGE power source. 100% complete, the system includes valve, pump and reservoir in one package. Hotwire to the battery supplies the source for power. The Power Package removes completely along with the Zacklift during the drive-off procedure. Simply disconnect the hotwire to the battery, and go. All wire is carefully pre-engineered inside the FIFTHWHEELER beam. Hoses are factory manufactured and mounted to the beam base and enclosed in a custom roto-moulded cover. If the toolbox option is utilized, all hoses and fittings are factory mounted inside the box.

Either of the No-Charge valve choices: the valve for PTO use, or the 12 Volt Power Pack, includes the industry’s best corded remote. 15’ of the highest quality cord available assures smooth trouble-free operation.