Permanent Mount Mounting & Installation Guide
| Factory pre-engineered, making stationary mounting solid, and easily applied to any chassis. The mounting hardware can be utilized on a bare chassis, a conventional wrecker assembly or an owner engineered body or crane assembly. Obstructions can be accommodated for, and options such as STIFF LEGS and WINCH can be easily added. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Location from the ground, tailboard location, positioning of the tilt cylinder, and all elements of the mounting have all been carefully pre-engineered so that the Zacklift can be owner-installed if required. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A housing is provided which integrates the mounting ears and frame crossmember for error-free positioning. These mounting ears saddle over the frame for drop-in convenience. The ears are designed for trimming around any obstruction and for height adjustment. The pivot point on the mounting ears has a range of easy adjustment for absolutely any truck width and height, foreign or domestic. The truck’s subframe is securely reinforced with the Zacklift mounting hardware. Detailed subframe specifications are available from Zacklift if desired. Step by step mounting instructions are included with the Zacklift underlift, and can be downloaded here.  |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
||||
The contents appearing on this web site are the
property of Zacklift International, its clients and partners.
Copyright© since 2010. Web Developer: Amdian